summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorYann E. MORIN <yann.morin.1998@free.fr>2013-04-11 12:17:51 (GMT)
committer Peter Korsgaard <jacmet@sunsite.dk>2013-04-12 12:39:24 (GMT)
commit69036c20f14de6d919bc423af32a51a84b023893 (patch)
tree0f7ab1fcd0f880643c09f8a12709f07cb19250ff
parent5fbef614802d4de658a387e9306b52f31356db26 (diff)
downloadbuildroot-69036c20f14de6d919bc423af32a51a84b023893.tar.gz
buildroot-69036c20f14de6d919bc423af32a51a84b023893.tar.bz2
fs/ext2: add ability to build ext3/4 too
Use the host-e2fsprogs to tune2fs the generated rootfs.ext2 image, and upgrade it to either one of ext2, ext3 or ext4. Since calling tune2fs may require running e2fsck (tune2fs will warn to do so when certain FS options are changed), we systematically call e2fsck. This makes the code path simpler, and as a side-effect checks that genext2fs did not generate garbage. In turn, e2fsck will unconditionally add a UUID to the filesystem, which is bad for reproducibility, so we call tune2fs again to remove the UUID. This does not require checking the filesystem. To ensure compatibility of Buildroot's .config, leave ext2 as the default. Boards' .config can override this at will. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Arnout Vandecappelle <arnout@mind.be> Cc: Peter Korsgaard <jacmet@uclibc.org> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
-rw-r--r--fs/ext2/Config.in36
-rw-r--r--fs/ext2/ext2.mk6
-rwxr-xr-xfs/ext2/genext2fs.sh73
-rw-r--r--package/e2fsprogs/Config.in.host2
4 files changed, 106 insertions, 11 deletions
diff --git a/fs/ext2/Config.in b/fs/ext2/Config.in
index cb4beed..c8320e2 100644
--- a/fs/ext2/Config.in
+++ b/fs/ext2/Config.in
@@ -1,10 +1,32 @@
config BR2_TARGET_ROOTFS_EXT2
- bool "ext2 root filesystem"
+ bool "ext2/3/4 root filesystem"
+ select BR2_PACKAGE_HOST_E2FSPROGS
help
- Build an ext2 root filesystem
+ Build an ext2/3/4 root filesystem
if BR2_TARGET_ROOTFS_EXT2
+choice
+ bool "ext2/3/4 variant"
+ default BR2_TARGET_ROOTFS_EXT2_2
+
+config BR2_TARGET_ROOTFS_EXT2_2
+ bool "ext2"
+
+config BR2_TARGET_ROOTFS_EXT2_3
+ bool "ext3"
+
+config BR2_TARGET_ROOTFS_EXT2_4
+ bool "ext4"
+
+endchoice
+
+config BR2_TARGET_ROOTFS_EXT2_GEN
+ int
+ default 2 if BR2_TARGET_ROOTFS_EXT2_2
+ default 3 if BR2_TARGET_ROOTFS_EXT2_3
+ default 4 if BR2_TARGET_ROOTFS_EXT2_4
+
config BR2_TARGET_ROOTFS_EXT2_BLOCKS
int "size in blocks (leave at 0 for auto calculation)"
default 0
@@ -21,27 +43,27 @@ choice
prompt "Compression method"
default BR2_TARGET_ROOTFS_EXT2_NONE
help
- Select compressor for ext2 filesystem of the root filesystem
+ Select compressor for ext2/3/4 filesystem of the root filesystem
config BR2_TARGET_ROOTFS_EXT2_NONE
bool "no compression"
help
- Do not compress the ext2 filesystem.
+ Do not compress the ext2/3/4 filesystem.
config BR2_TARGET_ROOTFS_EXT2_GZIP
bool "gzip"
help
- Do compress the ext2 filesystem with gzip.
+ Do compress the ext2/3/4 filesystem with gzip.
config BR2_TARGET_ROOTFS_EXT2_BZIP2
bool "bzip2"
help
- Do compress the ext2 filesystem with bzip2.
+ Do compress the ext2/3/4 filesystem with bzip2.
config BR2_TARGET_ROOTFS_EXT2_LZMA
bool "lzma"
help
- Do compress the ext2 filesystem with lzma.
+ Do compress the ext2/3/4 filesystem with lzma.
endchoice
diff --git a/fs/ext2/ext2.mk b/fs/ext2/ext2.mk
index 7b71592..018a5a3 100644
--- a/fs/ext2/ext2.mk
+++ b/fs/ext2/ext2.mk
@@ -18,10 +18,12 @@ ifneq ($(strip $(BR2_TARGET_ROOTFS_EXT2_RESBLKS)),0)
EXT2_OPTS += -m $(BR2_TARGET_ROOTFS_EXT2_RESBLKS)
endif
-ROOTFS_EXT2_DEPENDENCIES = host-genext2fs
+ROOTFS_EXT2_DEPENDENCIES = host-genext2fs host-e2fsprogs
+
+EXT2_ENV = GEN=$(BR2_TARGET_ROOTFS_EXT2_GEN)
define ROOTFS_EXT2_CMD
- PATH=$(TARGET_PATH) fs/ext2/genext2fs.sh -d $(TARGET_DIR) $(EXT2_OPTS) $@
+ PATH=$(TARGET_PATH) $(EXT2_ENV) fs/ext2/genext2fs.sh -d $(TARGET_DIR) $(EXT2_OPTS) $@
endef
$(eval $(call ROOTFS_TARGET,ext2))
diff --git a/fs/ext2/genext2fs.sh b/fs/ext2/genext2fs.sh
index 7a518ae..c2049f5 100755
--- a/fs/ext2/genext2fs.sh
+++ b/fs/ext2/genext2fs.sh
@@ -1,10 +1,13 @@
#!/bin/sh
# genext2fs wrapper calculating needed blocks/inodes values if not specified
+set -e
export LC_ALL=C
CALC_BLOCKS=1
CALC_INODES=1
+EXT_OPTS=
+EXT_OPTS_O=
while getopts x:d:D:b:i:N:m:g:e:zfqUPhVv f
do
@@ -14,6 +17,7 @@ do
d) TARGET_DIR=$OPTARG ;;
esac
done
+eval IMG="\"\${${OPTIND}}\""
# calculate needed inodes
if [ $CALC_INODES -eq 1 ];
@@ -30,7 +34,74 @@ then
# we scale inodes / blocks with 10% to compensate for bitmaps size + slack
BLOCKS=$(du -s -c -k $TARGET_DIR | grep total | sed -e "s/total//")
BLOCKS=$(expr 500 + \( $BLOCKS + $INODES / 8 \) \* 11 / 10)
+ # we add 1081 blocks (a bit more than 1 MiB, assuming 1KiB blocks) for
+ # the journal if ext3/4
+ # Note: I came to 1081 blocks after trial-and-error checks. With 1080 or
+ # less additional blocks, and tune2fs would refuse to add the journal;
+ # with 1081 additional blocks or above, tune2fs wil happily add a journal.
+ # YMMV.
+ if [ ${GEN} -ge 3 ]; then
+ BLOCKS=$(expr 1081 + $BLOCKS )
+ fi
set -- $@ -b $BLOCKS
fi
-exec genext2fs $@
+e2tunefsck() {
+ # Upgrade the file system
+ if [ $# -ne 0 ]; then
+ tune2fs "$@" "${IMG}"
+ fi
+
+ # After changing filesystem options, running fsck is required
+ # (see: man tune2fs). Running e2fsck in other cases will ensure
+ # coherency of the filesystem, although it is not required.
+ # 'e2fsck -pDf' means:
+ # - automatically repair
+ # - optimise and check for duplicate entries
+ # - force checking
+ # Sending output to oblivion, as e2fsck can be *very* verbose,
+ # especially with filesystems generated by genext2fs.
+ # Exit codes 1 & 2 are OK, it means fs errors were successfully
+ # corrected, hence our little trick with $ret.
+ ret=0
+ e2fsck -pDf "${IMG}" >/dev/null || ret=$?
+ case ${ret} in
+ 0|1|2) ;;
+ *) exit ${ret};;
+ esac
+ printf "\ne2fsck was successfully run on '%s' (ext%d)\n\n" \
+ "${IMG##*/}" "${GEN}"
+
+ # e2fsck will force a *random* UUID, which is bad
+ # for reproducibility, so we do not want it
+ tune2fs -U clear "${IMG}"
+}
+
+# Check we know what generation to generate
+case "${GEN}" in
+ 2|3|4)
+ ;;
+ *)
+ printf "%s: unknown ext generation to generate\n" "${0##*/}" >&2
+ exit 1
+ ;;
+esac
+
+# Add a journal for ext3 and above
+if [ ${GEN} -ge 3 ]; then
+ EXT_OPTS="${EXT_OPTS} -j -J size=1"
+fi
+
+# Add ext4 specific features
+if [ ${GEN} -ge 4 ]; then
+ EXT_OPTS_O="${EXT_OPTS_O},extents,uninit_bg,dir_index"
+fi
+
+# Add our -O options (there will be at most one leading comma, remove it)
+if [ -n "${EXT_OPTS_O}" ]; then
+ EXT_OPTS="${EXT_OPTS} -O ${EXT_OPTS_O#,}"
+fi
+
+# Generate and upgrade the filesystem
+genext2fs "$@"
+e2tunefsck ${EXT_OPTS}
diff --git a/package/e2fsprogs/Config.in.host b/package/e2fsprogs/Config.in.host
index ea6a0bd..0c001c2 100644
--- a/package/e2fsprogs/Config.in.host
+++ b/package/e2fsprogs/Config.in.host
@@ -1,6 +1,6 @@
config BR2_PACKAGE_HOST_E2FSPROGS
bool "host e2fsprogs"
help
- The EXT2 file system utilities.
+ The EXT2/3/4 file system utilities.
http://e2fsprogs.sf.net