summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorThomas Petazzoni <thomas.petazzoni@free-electrons.com>2012-09-04 04:04:06 (GMT)
committer Peter Korsgaard <jacmet@sunsite.dk>2012-09-20 20:31:08 (GMT)
commit669d07bdd47ac6789886729fa635db55dd352ae2 (patch)
tree0827409cb6d2289713483da2b6e1948b8759b27c
parentb189c516d4fd810a95feaff34da97579783f5e5b (diff)
downloadbuildroot-669d07bdd47ac6789886729fa635db55dd352ae2.tar.gz
buildroot-669d07bdd47ac6789886729fa635db55dd352ae2.tar.bz2
Remove the Xtensa architecture
As stated in commit 555c2585bf28c3ef71f6d2dcdd983d17a19892af, the Xtensa architecture has been introduced in 2009 and never changed since its initial introduction. It requires some special handling that is a bit annoying, and despite our call to the initial developers, and the announcement of the deprecation of the architecture during the 2012.05, nothing has happened. Therefore, drop support for this architecture. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: me Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
-rw-r--r--Makefile3
-rw-r--r--linux/Config.in2
-rw-r--r--package/ltrace/Config.in2
-rw-r--r--target/Config.in.arch40
-rw-r--r--target/device/xtensa/device_table.txt189
-rw-r--r--target/xtensa/.gitignore1
-rw-r--r--target/xtensa/Makefile.in1
-rw-r--r--target/xtensa/defconfig129
-rw-r--r--target/xtensa/patch.in33
-rw-r--r--target/xtensa/setup-config57
-rw-r--r--target/xtensa/uClibc-0.9.30.config245
-rw-r--r--target/xtensa/uClibc.config190
-rw-r--r--target/xtensa/xt-buildroot-overlay-install488
-rw-r--r--toolchain/gcc/gcc-uclibc-4.x.mk7
-rw-r--r--toolchain/gdb/gdb.mk7
-rw-r--r--toolchain/toolchain-common.in2
-rw-r--r--toolchain/uClibc/uclibc.mk1
17 files changed, 5 insertions, 1392 deletions
diff --git a/Makefile b/Makefile
index ba5da99..6536bca 100644
--- a/Makefile
+++ b/Makefile
@@ -231,9 +231,6 @@ QUIET:=$(if $(findstring s,$(MAKEFLAGS)),-q)
# Strip off the annoying quoting
ARCH:=$(call qstrip,$(BR2_ARCH))
-ifeq ($(ARCH),xtensa)
-ARCH:=$(ARCH)_$(call qstrip,$(BR2_xtensa_core_name))
-endif
KERNEL_ARCH:=$(shell echo "$(ARCH)" | sed -e "s/-.*//" \
-e s/i.86/i386/ -e s/sun4u/sparc64/ \
diff --git a/linux/Config.in b/linux/Config.in
index ff2700a..6e174ba 100644
--- a/linux/Config.in
+++ b/linux/Config.in
@@ -153,7 +153,7 @@ config BR2_LINUX_KERNEL_BZIMAGE
config BR2_LINUX_KERNEL_ZIMAGE
bool "zImage"
- depends on BR2_arm || BR2_armeb || BR2_powerpc || BR2_sparc || BR2_sh || BR2_sh64 || BR2_xtensa
+ depends on BR2_arm || BR2_armeb || BR2_powerpc || BR2_sparc || BR2_sh || BR2_sh64
config BR2_LINUX_KERNEL_APPENDED_ZIMAGE
bool "zImage with appended DT"
diff --git a/package/ltrace/Config.in b/package/ltrace/Config.in
index 9e71d82..a65ca48 100644
--- a/package/ltrace/Config.in
+++ b/package/ltrace/Config.in
@@ -1,6 +1,6 @@
config BR2_PACKAGE_LTRACE
bool "ltrace"
- depends on !(BR2_avr32 || BR2_mips || BR2_mipsel || BR2_sh || BR2_sh64 || BR2_xtensa)
+ depends on !(BR2_avr32 || BR2_mips || BR2_mipsel || BR2_sh || BR2_sh64)
select BR2_PACKAGE_LIBELF
help
Debugging program which runs a specified command until it exits.
diff --git a/target/Config.in.arch b/target/Config.in.arch
index 2233dd4..639327a 100644
--- a/target/Config.in.arch
+++ b/target/Config.in.arch
@@ -138,13 +138,6 @@ config BR2_x86_64
architecture compatible microprocessor).
http://en.wikipedia.org/wiki/X86_64
-config BR2_xtensa
- bool "Xtensa"
- depends on BR2_DEPRECATED
- help
- Xtensa is a Tensilica processor IP architecture.
- http://en.wikipedia.org/wiki/Xtensa
- http://www.tensilica.com/
endchoice
config BR2_microblaze
@@ -501,38 +494,6 @@ endchoice
choice
prompt "Target Architecture Variant"
- depends on BR2_xtensa
- default BR2_xtensa_dc232b
- help
- Specific CPU variant to use
-
-config BR2_xtensa_custom
- bool "Custom Xtensa processor configuration"
-config BR2_xtensa_dc232a
- bool "dc232a - Diamond 232L Standard Core Rev.A (LE)"
-config BR2_xtensa_dc232b
- bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
-#config BR2_xtensa_s5000
-# bool "s5000 - Stretch S5000"
-endchoice
-
-config BR2_xtensa_custom_name
- string "Custom Xtensa processor configuration name"
- depends on BR2_xtensa_custom
- default ""
- help
- Name given to a custom Xtensa processor configuration.
- This is used to select the correct overlay.
-
-config BR2_xtensa_core_name
- string
- default BR2_xtensa_custom_name if BR2_xtensa_custom
- default "dc232a" if BR2_xtensa_dc232a
- default "dc232b" if BR2_xtensa_dc232b
-# default "s5000" if BR2_xtensa_s5000
-
-choice
- prompt "Target Architecture Variant"
depends on BR2_powerpc
default BR2_generic_powerpc
help
@@ -665,7 +626,6 @@ config BR2_ARCH
default "sh4aeb" if BR2_sh4aeb
default "sh64" if BR2_sh64
default "sparc" if BR2_sparc
- default "xtensa" if BR2_xtensa
config BR2_ENDIAN
diff --git a/target/device/xtensa/device_table.txt b/target/device/xtensa/device_table.txt
deleted file mode 100644
index d0c7467..0000000
--- a/target/device/xtensa/device_table.txt
+++ /dev/null
@@ -1,189 +0,0 @@
-# When building a target filesystem, it is desirable to not have to
-# become root and then run 'mknod' a thousand times. Using a device
-# table you can create device nodes and directories "on the fly".
-#
-# This is a sample device table file for use with genext2fs. You can
-# do all sorts of interesting things with a device table file. For
-# example, if you want to adjust the permissions on a particular file
-# you can just add an entry like:
-# /sbin/foobar f 2755 0 0 - - - - -
-# and (assuming the file /sbin/foobar exists) it will be made setuid
-# root (regardless of what its permissions are on the host filesystem.
-# Furthermore, you can use a single table entry to create a many device
-# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15]
-# I could just use the following two table entries:
-# /dev/hda b 640 0 0 3 0 0 0 -
-# /dev/hda b 640 0 0 3 1 1 1 15
-#
-# Device table entries take the form of:
-# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-# where name is the file name, type can be one of:
-# f A regular file
-# d Directory
-# c Character special device file
-# b Block special device file
-# p Fifo (named pipe)
-# uid is the user id for the target file, gid is the group id for the
-# target file. The rest of the entries (major, minor, etc) apply only
-# to device special files.
-
-# Have fun
-# -Erik Andersen <andersen@codepoet.org>
-#
-
-#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-/dev d 755 0 0 - - - - -
-/dev/pts d 755 0 0 - - - - -
-/dev/shm d 755 0 0 - - - - -
-/tmp d 1777 0 0 - - - - -
-/etc d 755 0 0 - - - - -
-/home/default d 2755 1000 1000 - - - - -
-#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-/bin/busybox f 4755 0 0 - - - - -
-/etc/shadow f 600 0 0 - - - - -
-/etc/passwd f 644 0 0 - - - - -
-/etc/network/if-up.d d 755 0 0 - - - - -
-/etc/network/if-pre-up.d d 755 0 0 - - - - -
-/etc/network/if-down.d d 755 0 0 - - - - -
-/etc/network/if-post-down.d d 755 0 0 - - - - -
-/usr/share/udhcpc/default.script f 755 0 0 - - - - -
-# uncomment this to allow starting x as non-root
-#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - -
-# Normal system devices
-/dev/mem c 640 0 0 1 1 0 0 -
-/dev/kmem c 640 0 0 1 2 0 0 -
-/dev/null c 666 0 0 1 3 0 0 -
-/dev/zero c 666 0 0 1 5 0 0 -
-/dev/random c 666 0 0 1 8 0 0 -
-/dev/urandom c 666 0 0 1 9 0 0 -
-/dev/ram b 640 0 0 1 1 0 0 -
-/dev/ram b 640 0 0 1 0 0 1 4
-/dev/loop b 640 0 0 7 0 0 1 2
-/dev/rtc c 640 0 0 10 135 - - -
-/dev/console c 666 0 0 5 1 - - -
-/dev/tty c 666 0 0 5 0 - - -
-/dev/tty c 666 0 0 4 0 0 1 8
-/dev/ttyp c 666 0 0 3 0 0 1 10
-/dev/ptyp c 666 0 0 2 0 0 1 10
-/dev/ptmx c 666 0 0 5 2 - - -
-/dev/ttyP c 666 0 0 57 0 0 1 4
-/dev/ttyS c 666 0 0 4 64 0 1 4
-/dev/fb c 640 0 5 29 0 0 1 4
-#/dev/ttySA c 666 0 0 204 5 0 1 3
-/dev/psaux c 666 0 0 10 1 0 0 -
-#/dev/ppp c 666 0 0 108 0 - - -
-/dev/ttyCPM c 666 0 0 204 46 0 1 4
-/dev/ttyAMA c 666 0 0 204 64 0 1 4
-/dev/ttySAC c 666 0 0 204 64 0 1 4
-/dev/ttyPSC c 666 0 0 204 148 0 1 4
-/dev/ttyUL c 666 0 0 204 187 0 1 4
-/dev/ttymxc c 666 0 0 207 16 0 1 3
-
-# Input stuff
-/dev/input d 755 0 0 - - - - -
-/dev/input/mice c 640 0 0 13 63 0 0 -
-/dev/input/mouse c 660 0 0 13 32 0 1 4
-/dev/input/event c 660 0 0 13 64 0 1 4
-#/dev/input/js c 660 0 0 13 0 0 1 4
-
-
-# MTD stuff
-/dev/mtd c 640 0 0 90 0 0 2 4
-/dev/mtdblock b 640 0 0 31 0 0 1 4
-
-#Tun/tap driver
-/dev/net d 755 0 0 - - - - -
-/dev/net/tun c 660 0 0 10 200 - - -
-
-# Audio stuff
-#/dev/audio c 666 0 29 14 4 - - -
-#/dev/audio1 c 666 0 29 14 20 - - -
-#/dev/dsp c 666 0 29 14 3 - - -
-#/dev/dsp1 c 666 0 29 14 19 - - -
-#/dev/sndstat c 666 0 29 14 6 - - -
-
-# User-mode Linux stuff
-#/dev/ubda b 640 0 0 98 0 0 0 -
-#/dev/ubda b 640 0 0 98 1 1 1 15
-
-# IDE Devices
-/dev/hda b 640 0 0 3 0 0 0 -
-/dev/hda b 640 0 0 3 1 1 1 15
-/dev/hdb b 640 0 0 3 64 0 0 -
-/dev/hdb b 640 0 0 3 65 1 1 15
-#/dev/hdc b 640 0 0 22 0 0 0 -
-#/dev/hdc b 640 0 0 22 1 1 1 15
-#/dev/hdd b 640 0 0 22 64 0 0 -
-#/dev/hdd b 640 0 0 22 65 1 1 15
-#/dev/hde b 640 0 0 33 0 0 0 -
-#/dev/hde b 640 0 0 33 1 1 1 15
-#/dev/hdf b 640 0 0 33 64 0 0 -
-#/dev/hdf b 640 0 0 33 65 1 1 15
-#/dev/hdg b 640 0 0 34 0 0 0 -
-#/dev/hdg b 640 0 0 34 1 1 1 15
-#/dev/hdh b 640 0 0 34 64 0 0 -
-#/dev/hdh b 640 0 0 34 65 1 1 15
-
-# SCSI Devices
-/dev/sda b 640 0 0 8 0 0 0 -
-/dev/sda b 640 0 0 8 1 1 1 15
-/dev/sdb b 640 0 0 8 16 0 0 -
-/dev/sdb b 640 0 0 8 17 1 1 15
-#/dev/sdc b 640 0 0 8 32 0 0 -
-#/dev/sdc b 640 0 0 8 33 1 1 15
-#/dev/sdd b 640 0 0 8 48 0 0 -
-#/dev/sdd b 640 0 0 8 49 1 1 15
-#/dev/sde b 640 0 0 8 64 0 0 -
-#/dev/sde b 640 0 0 8 65 1 1 15
-#/dev/sdf b 640 0 0 8 80 0 0 -
-#/dev/sdf b 640 0 0 8 81 1 1 15
-#/dev/sdg b 640 0 0 8 96 0 0 -
-#/dev/sdg b 640 0 0 8 97 1 1 15
-#/dev/sdh b 640 0 0 8 112 0 0 -
-#/dev/sdh b 640 0 0 8 113 1 1 15
-#/dev/sg c 640 0 0 21 0 0 1 15
-#/dev/scd b 640 0 0 11 0 0 1 15
-#/dev/st c 640 0 0 9 0 0 1 8
-#/dev/nst c 640 0 0 9 128 0 1 8
-#/dev/st c 640 0 0 9 32 1 1 4
-#/dev/st c 640 0 0 9 64 1 1 4
-#/dev/st c 640 0 0 9 96 1 1 4
-
-# USB block devices (ub driver)
-/dev/uba b 640 0 0 180 0 0 0 -
-/dev/uba b 640 0 0 180 1 1 1 6
-/dev/ubb b 640 0 0 180 8 0 0 -
-/dev/ubb b 640 0 0 180 65 1 1 6
-
-# Floppy disk devices
-#/dev/fd b 640 0 0 2 0 0 1 2
-#/dev/fd0d360 b 640 0 0 2 4 0 0 -
-#/dev/fd1d360 b 640 0 0 2 5 0 0 -
-#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
-#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
-#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
-#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
-#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
-#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
-
-# All the proprietary cdrom devices in the world
-#/dev/aztcd b 640 0 0 29 0 0 0 -
-#/dev/bpcd b 640 0 0 41 0 0 0 -
-#/dev/capi20 c 640 0 0 68 0 0 1 2
-#/dev/cdu31a b 640 0 0 15 0 0 0 -
-#/dev/cdu535 b 640 0 0 24 0 0 0 -
-#/dev/cm206cd b 640 0 0 32 0 0 0 -
-#/dev/sjcd b 640 0 0 18 0 0 0 -
-#/dev/sonycd b 640 0 0 15 0 0 0 -
-#/dev/gscd b 640 0 0 16 0 0 0 -
-#/dev/sbpcd b 640 0 0 25 0 0 0 -
-#/dev/sbpcd b 640 0 0 25 0 0 1 4
-#/dev/mcd b 640 0 0 23 0 0 0 -
-#/dev/optcd b 640 0 0 17 0 0 0 -
-
-# I2C device nodes
-/dev/i2c- c 666 0 0 89 0 0 1 4
-
-# Xtensa special devices
-/dev/simdisk0 b 640 0 0 240 0 0 0
-/dev/simdisk1 b 640 0 0 240 1 0 0
diff --git a/target/xtensa/.gitignore b/target/xtensa/.gitignore
deleted file mode 100644
index cff61bf..0000000
--- a/target/xtensa/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/busybox-config
diff --git a/target/xtensa/Makefile.in b/target/xtensa/Makefile.in
deleted file mode 100644
index 8a654b9..0000000
--- a/target/xtensa/Makefile.in
+++ /dev/null
@@ -1 +0,0 @@
--include target/xtensa/*/*.mk
diff --git a/target/xtensa/defconfig b/target/xtensa/defconfig
deleted file mode 100644
index 0eee5c0..0000000
--- a/target/xtensa/defconfig
+++ /dev/null
@@ -1,129 +0,0 @@
-# Default buildroot configuration for running Linux on an Xtensa processor
-# on an LX60 board.
-
-#
-# Project Options
-#
-BR2_BANNER="Welcome to your custom Xtensa processor based uClibc environment."
-BR2_HAVE_DOT_CONFIG=y
-BR2_xtensa=y
-BR2_xtensa_dc232b=y
-BR2_xtensa_core_name="dc232b"
-BR2_ARCH="xtensa"
-
-#
-# Build options
-#
-BR2_WGET="wget --passive-ftp"
-# BR2_STRIP_strip is not set
-# BR2_STRIP_none=y
-
-## Added by Maxim
-
-#
-# Kernel Header Options
-#
-BR2_KERNEL_none=y
-BR2_KERNEL_HEADERS_2_6_22_1=y
-BR2_DEFAULT_KERNEL_HEADERS="2.6.22.1"
-
-#
-# uClibc Options
-#
-BR2_UCLIBC_VERSION_0_9_30=y
-# BR2_UCLIBC_VERSION_SNAPSHOT is not set
-BR2_UCLIBC_CONFIG="target/xtensa/uClibc-0.9.30.config"
-BR2_PTHREADS_OLD=y
-# BR2_PTHREADS_NATIVE is not set
-BR2_PTHREAD_DEBUG=y
-
-#
-# Binutils Options
-#
-BR2_BINUTILS_VERSION_2_19=y
-BR2_BINUTILS_VERSION="2.19"
-BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
-
-#
-# Gcc Options
-#
-BR2_GCC_VERSION_4_3_2=y
-# BR2_GCC_IS_SNAP is not set
-BR2_GCC_VERSION="4.3.2"
-BR2_TOOLCHAIN_SYSROOT=y
-BR2_EXTRA_GCC_CONFIG_OPTIONS=""
-BR2_GCC_CROSS_CXX=y
-BR2_INSTALL_LIBSTDCPP=y
-BR2_GCC_SHARED_LIBGCC=y
-
-#
-# Gdb Options
-#
-BR2_PACKAGE_GDB=y
-BR2_PACKAGE_GDB_SERVER=y
-BR2_PACKAGE_GDB_HOST=y
-# BR2_GDB_VERSION_6_2_1 is not set
-# BR2_GDB_VERSION_6_3 is not set
-# BR2_GDB_VERSION_6_4 is not set
-# BR2_GDB_VERSION_6_5 is not set
-# BR2_GDB_VERSION_6_6 is not set
-# BR2_GDB_VERSION_6_7_1 is not set
-BR2_GDB_VERSION_6_8=y
-# BR2_GDB_VERSION_SNAPSHOT is not set
-BR2_GDB_VERSION="6.8"
-
-#
-# Common Toolchain Options
-#
-# BR2_PACKAGE_SSTRIP_TARGET is not set
-# BR2_PACKAGE_SSTRIP_HOST is not set
-BR2_LARGEFILE=y
-BR2_INET_RPC=y
-BR2_TARGET_OPTIMIZATION="-Os -pipe"
-
-
-## Added by Maxim
-BR2_TOOLCHAIN_BUILDROOT=y
-
-
-# BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-
-#
-# Other development stuff
-#
-# BR2_PACKAGE_LIBINTL is not set
-# For NFS mount:
-BR2_PACKAGE_PORTMAP=y
-
-#
-# Other stuff
-#
-
-#
-# filesystem for target device
-#
-BR2_ROOTFS_DEVICE_TABLE="target/device/xtensa/device_table.txt"
-BR2_TARGET_ROOTFS_CPIO=y
-BR2_TARGET_ROOTFS_CPIO_GZIP=y
-BR2_TARGET_ROOTFS_INITRAMFS=y
-
-#
-# Linux Options
-#
-# BR2_PACKAGE_LINUX is not set
-
-#
-# Board Support Options
-#
-BR2_TARGET_XTENSA=y
-
-#
-# Tensilica Xtensa/Diamond based Device Support
-#
-BR2_TARGET_XTENSA_XTAV60=y
-
-#
-# Compressors / decompressors
-#
-
-BR2_PACKAGE_ZLIB=y
diff --git a/target/xtensa/patch.in b/target/xtensa/patch.in
deleted file mode 100644
index 3fe5cc8..0000000
--- a/target/xtensa/patch.in
+++ /dev/null
@@ -1,33 +0,0 @@
-ifneq ($(filter xtensa%,$(ARCH)),)
-#############################################################
-#
-# Xtensa processor architecture (including Diamond Standard cores)
-#
-#############################################################
-
-# The following defines a function to be used like this:
-# $(call XTENSA_PATCH, <module>, <patchdir>, <relative dir list...>)
-# which returns the first overlay patch file for <module> found
-# in the list of directories <relative dir list...> which are
-# relative to <patchdir> (itself either absolute or relative to the
-# current directory). The returned filename is relative to <patchdir>.
-# For example:
-# $(call XTENSA_PATCH, binutils, some/dir/path, . ..)
-# (no commas between directory paths in the list).
-#
-# A selected overlay patch must exist ("fsf" means no specific
-# overlay is selected). So the function emits a Makefile error
-# if a selected patch file is not found.
-
-XTENSA_CORENAME:=$(call qstrip,$(BR2_xtensa_core_name))
-ifeq ($(XTENSA_CORENAME),fsf)
-XTENSA_PATCH =
-else
-XTENSA_PATCH_SUFFIX = $(1)-xtensa_$(XTENSA_CORENAME).tgz
-XTENSA_PATCH_FILE = $(firstword $(wildcard $(patsubst %,$(2)/%/*$(XTENSA_PATCH_SUFFIX),$(3))))
-# FULLPATH = $(if $(filter /%,$(1)),$(1),$(PWD)/$(1))
-XTENSA_PATCH = $(if $(XTENSA_PATCH_FILE),$(patsubst $(2)/%,%,$(XTENSA_PATCH_FILE)),\
- $(error Missing $(1) patch for Xtensa $(XTENSA_CORENAME) processor (*$(XTENSA_PATCH_SUFFIX) in $(addprefix $(2)/,$(3)))))
-endif
-
-endif
diff --git a/target/xtensa/setup-config b/target/xtensa/setup-config
deleted file mode 100644
index 7ef8fe8..0000000
--- a/target/xtensa/setup-config
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/sh
-
-# Convenience script for setting up a default buildroot config
-# for Xtensa processor targets..
-
-usage() {
- echo "Usage (invoke from top of buildroot tree):"
- echo " ./target/xtensa/setup-config <corename>"
- #echo " ./target/xtensa/setup-config <corename> [<overlaypath>]"
- echo "where:"
- echo " <corename> is the Xtensa core overlay name, as specified in the -c option"
- echo " of the ./target/xtensa/xt-buildroot-overlay-install script."
- echo ""
- echo "For example:"
- echo " ./target/xtensa/setup-config dc232b"
- echo ""
- echo "Currently installed (available) core overlay names are:"
- echo " " `ls toolchain/binutils/binutils-xtensa_*.tgz | sed -e 's,toolchain\/binutils\/binutils-xtensa_\(.*\)\.tgz,\1,g'`
- exit 1
-}
-
-if [ $# -ne 1 ]; then
- usage
-fi
-
-core=$1 ; shift
-
-if [ ! -f toolchain/binutils/binutils-xtensa_${core}.tgz \
- -o ! -f toolchain/gcc/gcc-xtensa_${core}.tgz \
- -o ! -f toolchain/gdb/gdb-xtensa_${core}.tgz ]; then
- echo "ERROR: Did not find an installed Xtensa core overlay named '${core}'."
- echo "ERROR: Please install it first with ./target/xtensa/xt-buildroot-overlay-install"
- echo ""
- usage
-fi
-
-# Use preset buildroot config:
-cp target/xtensa/defconfig .defconfig-xtensa
-# Set core name:
-sed -i -e 's,^BR2_xtensa_\(.*\)=y,BR2_xtensa_custom=y\nBR2_xtensa_custom_name="'${core}'",' .defconfig-xtensa
-## sed -i -e 's,^.*BR2_xtensa_core_name.*,BR_xtensa_core_name="'${core}'",' .defconfig-xtensa
-# Create full .config with defaults:
-make clean defconfig CONFIG_DEFCONFIG=.defconfig-xtensa || exit 1
-
-# Busybox adjustments: turn off 'ar' (can't create archives yet overrides real one)
-# and turn on NFS mounting (Xtensa defconfig turns on RPC so this can work):
-#
-bborig=`grep '^BR2_PACKAGE_BUSYBOX_CONFIG=' .config | sed -e 's,.*"\(.*\)".*,\1,'`
-bbconf=target/xtensa/busybox-config
-cp $bborig $bbconf
-sed -i -e 's,^CONFIG_AR=y,# CONFIG_AR is not set,' $bbconf
-sed -i -e 's,^.*CONFIG_FEATURE_MOUNT_NFS.*,CONFIG_FEATURE_MOUNT_NFS=y,' $bbconf
-# Make use of above busybox adjustments:
-sed -i -e 's,.*\(BR2_PACKAGE_BUSYBOX_CONFIG\).*,\1="'$bbconf'",' .config
-
-echo "Done."
-
diff --git a/target/xtensa/uClibc-0.9.30.config b/target/xtensa/uClibc-0.9.30.config
deleted file mode 100644
index 5701fe4..0000000
--- a/target/xtensa/uClibc-0.9.30.config
+++ /dev/null
@@ -1,245 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Thu Jan 23 14:50:00 2009
-#
-# TARGET_alpha is not set
-# TARGET_arm is not set
-# TARGET_avr32 is not set
-# TARGET_bfin is not set
-# TARGET_cris is not set
-# TARGET_e1 is not set
-# TARGET_frv is not set
-# TARGET_h8300 is not set
-# TARGET_hppa is not set
-# TARGET_i386 is not set
-# TARGET_i960 is not set
-# TARGET_ia64 is not set
-# TARGET_m68k is not set
-# TARGET_microblaze is not set
-# TARGET_mips is not set
-# TARGET_nios is not set
-# TARGET_nios2 is not set
-# TARGET_powerpc is not set
-# TARGET_sh is not set
-# TARGET_sh64 is not set
-# TARGET_sparc is not set
-# TARGET_v850 is not set
-# TARGET_vax is not set
-# TARGET_x86_64 is not set
-TARGET_xtensa=y
-
-#
-# Target Architecture Features and Options
-#
-TARGET_ARCH="xtensa"
-FORCE_OPTIONS_FOR_ARCH=y
-# ARCH_LITTLE_ENDIAN is not set
-# ARCH_BIG_ENDIAN is not set
-# ARCH_WANTS_LITTLE_ENDIAN is not set
-# ARCH_WANTS_BIG_ENDIAN is not set
-
-#
-# Using ELF file format
-#
-ARCH_HAS_MMU=y
-ARCH_USE_MMU=y
-UCLIBC_HAS_FLOATS=y
-UCLIBC_HAS_FPU=y
-DO_C99_MATH=y
-# UCLIBC_HAS_FENV is not set
-UCLIBC_HAS_LONG_DOUBLE_MATH=y
-KERNEL_HEADERS="/usr/src/linux/include"
-HAVE_DOT_CONFIG=y
-
-#
-# General Library Settings
-#
-# HAVE_NO_PIC is not set
-DOPIC=y
-# ARCH_HAS_NO_SHARED is not set
-# ARCH_HAS_NO_LDSO is not set
-HAVE_SHARED=y
-# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
-LDSO_LDD_SUPPORT=y
-LDSO_CACHE_SUPPORT=y
-# LDSO_PRELOAD_FILE_SUPPORT is not set
-LDSO_BASE_FILENAME="ld.so"
-# UCLIBC_STATIC_LDCONFIG is not set
-# LDSO_RUNPATH is not set
-UCLIBC_CTOR_DTOR=y
-# LDSO_GNU_HASH_SUPPORT is not set
-# HAS_NO_THREADS is not set
-UCLIBC_HAS_THREADS=y
-PTHREADS_DEBUG_SUPPORT=y
-LINUXTHREADS_OLD=y
-UCLIBC_HAS_SYSLOG=y
-UCLIBC_HAS_LFS=y
-# MALLOC is not set
-# MALLOC_SIMPLE is not set
-MALLOC_STANDARD=y
-MALLOC_GLIBC_COMPAT=y
-UCLIBC_DYNAMIC_ATEXIT=y
-# COMPAT_ATEXIT is not set
-UCLIBC_SUSV3_LEGACY=y
-UCLIBC_SUSV3_LEGACY_MACROS=y
-# UCLIBC_HAS_STUBS is not set
-UCLIBC_HAS_SHADOW=y
-UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y
-UCLIBC_HAS___PROGNAME=y
-UCLIBC_HAS_PTY=y
-UNIX98PTY_ONLY=y
-# UCLIBC_HAS_GETPT is not set
-ASSUME_DEVPTS=y
-UCLIBC_HAS_TM_EXTENSIONS=y
-UCLIBC_HAS_TZ_CACHING=y
-UCLIBC_HAS_TZ_FILE=y
-UCLIBC_HAS_TZ_FILE_READ_MANY=y
-UCLIBC_TZ_FILE_PATH="/etc/TZ"
-
-#
-# Advanced Library Settings
-#
-UCLIBC_PWD_BUFFER_SIZE=256
-UCLIBC_GRP_BUFFER_SIZE=256
-UCLIBC_HAS_NONREENTRANT=y
-
-#
-# Networking Support
-#
-
-UCLIBC_LINUX_MODULE_24=y
-UCLIBC_LINUX_SPECIFIC=y
-UCLIBC_HAS_GNU_ERROR=y
-UCLIBC_BSD_SPECIFIC=y
-UCLIBC_HAS_BSD_ERR=y
-UCLIBC_HAS_OBSOLETE_BSD_SIGNAL=y
-UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL=y
-# UCLIBC_NTP_LEGACY is not set
-# UCLIBC_SV4_DEPRECATED is not set
-UCLIBC_HAS_REALTIME=y
-UCLIBC_HAS_ADVANCED_REALTIME=y
-UCLIBC_HAS_EPOLL=y
-UCLIBC_HAS_XATTR=y
-UCLIBC_HAS_PROFILING=y
-UCLIBC_HAS_CRYPT_IMPL=y
-UCLIBC_HAS_CRYPT=y
-UCLIBC_HAS_NETWORK_SUPPORT=y
-UCLIBC_HAS_SOCKET=y
-UCLIBC_HAS_IPV4=y
-UCLIBC_HAS_IPV6=y
-UCLIBC_HAS_RPC=y
-UCLIBC_HAS_FULL_RPC=y
-UCLIBC_HAS_REENTRANT_RPC=y
-UCLIBC_USE_NETLINK=y
-# UCLIBC_SUPPORT_AI_ADDRCONFIG is not set
-# UCLIBC_HAS_BSD_RES_CLOSE is not set
-
-
-#
-# String and Stdio Support
-#
-# UCLIBC_HAS_STRING_GENERIC_OPT is not set
-# UCLIBC_HAS_STRING_ARCH_OPT is not set
-UCLIBC_HAS_CTYPE_TABLES=y
-UCLIBC_HAS_CTYPE_SIGNED=y
-# UCLIBC_HAS_CTYPE_UNSAFE is not set
-# UCLIBC_HAS_CTYPE_CHECKED is not set
-# UCLIBC_HAS_CTYPE_ENFORCED is not set
-# UCLIBC_HAS_WCHAR is not set
-# UCLIBC_HAS_LOCALE is not set
-UCLIBC_HAS_HEXADECIMAL_FLOATS=y
-UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
-# USE_OLD_VFPRINTF is not set
-UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
-UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
-# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
-UCLIBC_HAS_STDIO_BUFSIZ_4096=y
-# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
-UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
-# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
-# UCLIBC_HAS_STDIO_GETC_MACRO is not set
-# UCLIBC_HAS_STDIO_PUTC_MACRO is not set
-UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
-# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
-UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
-UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
-UCLIBC_HAS_PRINTF_M_SPEC=y
-UCLIBC_HAS_ERRNO_MESSAGES=y
-# UCLIBC_HAS_SYS_ERRLIST is not set
-UCLIBC_HAS_SIGNUM_MESSAGES=y
-# UCLIBC_HAS_SYS_SIGLIST is not set
-UCLIBC_HAS_GNU_GETOPT=y
-# UCLIBC_HAS_GNU_GETSUBOPT is not set
-
-#
-# Big and Tall
-#
-UCLIBC_HAS_REGEX=y
-# UCLIBC_HAS_REGEX_OLD is not set
-UCLIBC_HAS_FNMATCH=y
-# UCLIBC_HAS_FNMATCH_OLD is not set
-# UCLIBC_HAS_WORDEXP is not set
-UCLIBC_HAS_FTW=y
-UCLIBC_HAS_GLOB=y
-UCLIBC_HAS_GNU_GLOB=y
-
-#
-# Library Installation Options
-#
-SHARED_LIB_LOADER_PREFIX="/lib"
-RUNTIME_PREFIX="/"
-DEVEL_PREFIX="/usr/"
-
-#
-# Security options
-#
-# UCLIBC_BUILD_PIE is not set
-UCLIBC_HAS_ARC4RANDOM=y
-# HAVE_NO_SSP is not set
-# UCLIBC_HAS_SSP is not set
-UCLIBC_BUILD_RELRO=y
-UCLIBC_BUILD_NOW=y
-# UCLIBC_BUILD_NOEXECSTACK is not set
-
-#
-# uClibc development/debugging options
-#
-CROSS_COMPILER_PREFIX=""
-UCLIBC_EXTRA_CFLAGS=""
-# DODEBUG is not set
-# DODEBUG_PT is not set
-DOSTRIP=y
-# DOASSERTS is not set
-# SUPPORT_LD_DEBUG is not set
-# SUPPORT_LD_DEBUG_EARLY is not set
-# UCLIBC_MALLOC_DEBUGGING is not set
-WARNINGS="-Wall"
-# EXTRA_WARNINGS is not set
-# DOMULTI is not set
-# UCLIBC_MJN3_ONLY is not set
-
-# USE_BX is not set
-# CONFIG_GENERIC_ARM is not set
-# CONFIG_ARM610 is not set
-# CONFIG_ARM710 is not set
-# CONFIG_ARM7TDMI is not set
-# CONFIG_ARM720T is not set
-# CONFIG_ARM920T is not set
-# CONFIG_ARM922T is not set
-# CONFIG_ARM926T is not set
-# CONFIG_ARM10T is not set
-# CONFIG_ARM1136JF_S is not set
-# CONFIG_ARM1176JZ_S is not set
-# CONFIG_ARM1176JZF_S is not set
-# CONFIG_ARM_CORTEX_M3 is not set
-# CONFIG_ARM_CORTEX_M1 is not set
-# CONFIG_ARM_SA110 is not set
-# CONFIG_ARM_SA1100 is not set
-# CONFIG_ARM_XSCALE is not set
-# CONFIG_ARM_IWMMXT is not set
diff --git a/target/xtensa/uClibc.config b/target/xtensa/uClibc.config
deleted file mode 100644
index cd82fab..0000000
--- a/target/xtensa/uClibc.config
+++ /dev/null
@@ -1,190 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Thu Jan 10 00:46:51 2008
-#
-# TARGET_alpha is not set
-# TARGET_arm is not set
-# TARGET_avr32 is not set
-# TARGET_bfin is not set
-# TARGET_cris is not set
-# TARGET_e1 is not set
-# TARGET_frv is not set
-# TARGET_h8300 is not set
-# TARGET_hppa is not set
-# TARGET_i386 is not set
-# TARGET_i960 is not set
-# TARGET_ia64 is not set
-# TARGET_m68k is not set
-# TARGET_microblaze is not set
-# TARGET_mips is not set
-# TARGET_nios is not set
-# TARGET_nios2 is not set
-# TARGET_powerpc is not set
-# TARGET_sh is not set
-# TARGET_sh64 is not set
-# TARGET_sparc is not set
-# TARGET_v850 is not set
-# TARGET_vax is not set
-# TARGET_x86_64 is not set
-TARGET_xtensa=y
-
-#
-# Target Architecture Features and Options
-#
-TARGET_ARCH="xtensa"
-TARGET_SUBARCH=""
-
-#
-# Using ELF file format
-#
-ARCH_HAS_MMU=y
-ARCH_USE_MMU=y
-UCLIBC_HAS_FLOATS=y
-UCLIBC_HAS_FPU=y
-DO_C99_MATH=y
-KERNEL_HEADERS="/usr/src/linux/include"
-HAVE_DOT_CONFIG=y
-
-#
-# General Library Settings
-#
-# HAVE_NO_PIC is not set
-DOPIC=y
-# HAVE_NO_SHARED is not set
-# ARCH_HAS_NO_LDSO is not set
-HAVE_SHARED=y
-# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
-LDSO_LDD_SUPPORT=y
-LDSO_CACHE_SUPPORT=y
-# LDSO_PRELOAD_FILE_SUPPORT is not set
-LDSO_BASE_FILENAME="ld.so"
-# UCLIBC_STATIC_LDCONFIG is not set
-# LDSO_RUNPATH is not set
-UCLIBC_CTOR_DTOR=y
-# HAS_NO_THREADS is not set
-UCLIBC_HAS_THREADS=y
-PTHREADS_DEBUG_SUPPORT=y
-LINUXTHREADS_OLD=y
-UCLIBC_HAS_LFS=y
-# MALLOC is not set
-# MALLOC_SIMPLE is not set
-MALLOC_STANDARD=y
-MALLOC_GLIBC_COMPAT=y
-UCLIBC_DYNAMIC_ATEXIT=y
-# COMPAT_ATEXIT is not set
-# UCLIBC_SUSV3_LEGACY is not set
-UCLIBC_SUSV3_LEGACY_MACROS=y
-UCLIBC_HAS_SHADOW=y
-UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y
-UCLIBC_HAS___PROGNAME=y
-# UNIX98PTY_ONLY is not set
-ASSUME_DEVPTS=y
-UCLIBC_HAS_TM_EXTENSIONS=y
-UCLIBC_HAS_TZ_CACHING=y
-UCLIBC_HAS_TZ_FILE=y
-UCLIBC_HAS_TZ_FILE_READ_MANY=y
-UCLIBC_TZ_FILE_PATH="/etc/TZ"
-
-#
-# Advanced Library Settings
-#
-UCLIBC_PWD_BUFFER_SIZE=256
-UCLIBC_GRP_BUFFER_SIZE=256
-
-#
-# Networking Support
-#
-UCLIBC_HAS_IPV6=y
-UCLIBC_HAS_RPC=y
-UCLIBC_HAS_FULL_RPC=y
-UCLIBC_HAS_REENTRANT_RPC=y
-# UCLIBC_USE_NETLINK is not set
-# UCLIBC_HAS_BSD_RES_CLOSE is not set
-
-#
-# String and Stdio Support
-#
-UCLIBC_HAS_STRING_GENERIC_OPT=y
-UCLIBC_HAS_STRING_ARCH_OPT=y
-UCLIBC_HAS_CTYPE_TABLES=y
-UCLIBC_HAS_CTYPE_SIGNED=y
-# UCLIBC_HAS_CTYPE_UNSAFE is not set
-UCLIBC_HAS_CTYPE_CHECKED=y
-# UCLIBC_HAS_CTYPE_ENFORCED is not set
-# UCLIBC_HAS_WCHAR is not set
-# UCLIBC_HAS_LOCALE is not set
-UCLIBC_HAS_HEXADECIMAL_FLOATS=y
-UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
-# USE_OLD_VFPRINTF is not set
-UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
-UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
-# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
-UCLIBC_HAS_STDIO_BUFSIZ_4096=y
-# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
-UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
-# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
-UCLIBC_HAS_STDIO_GETC_MACRO=y
-UCLIBC_HAS_STDIO_PUTC_MACRO=y
-UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
-# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
-UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
-UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
-UCLIBC_HAS_PRINTF_M_SPEC=y
-UCLIBC_HAS_ERRNO_MESSAGES=y
-# UCLIBC_HAS_SYS_ERRLIST is not set
-UCLIBC_HAS_SIGNUM_MESSAGES=y
-# UCLIBC_HAS_SYS_SIGLIST is not set
-UCLIBC_HAS_GNU_GETOPT=y
-UCLIBC_HAS_GNU_GETSUBOPT=y
-
-#
-# Big and Tall
-#
-UCLIBC_HAS_REGEX=y
-UCLIBC_HAS_REGEX_OLD=y
-UCLIBC_HAS_FNMATCH=y
-UCLIBC_HAS_FNMATCH_OLD=y
-# UCLIBC_HAS_WORDEXP is not set
-UCLIBC_HAS_FTW=y
-UCLIBC_HAS_GLOB=y
-UCLIBC_HAS_GNU_GLOB=y
-
-#
-# Library Installation Options
-#
-SHARED_LIB_LOADER_PREFIX="/lib"
-RUNTIME_PREFIX="/"
-DEVEL_PREFIX="/usr/"
-
-#
-# Security options
-#
-# UCLIBC_HAS_ARC4RANDOM is not set
-# HAVE_NO_SSP is not set
-# UCLIBC_HAS_SSP is not set
-UCLIBC_BUILD_RELRO=y
-UCLIBC_BUILD_NOW=y
-# UCLIBC_BUILD_NOEXECSTACK is not set
-
-#
-# uClibc development/debugging options
-#
-CROSS_COMPILER_PREFIX=""
-UCLIBC_EXTRA_CFLAGS=""
-# DODEBUG is not set
-# DOSTRIP is not set
-# DODEBUG_PT is not set
-# DOASSERTS is not set
-SUPPORT_LD_DEBUG=y
-# SUPPORT_LD_DEBUG_EARLY is not set
-# UCLIBC_MALLOC_DEBUGGING is not set
-WARNINGS="-Wall"
-EXTRA_WARNINGS=y
-# DOMULTI is not set
-# UCLIBC_MJN3_ONLY is not set
diff --git a/target/xtensa/xt-buildroot-overlay-install b/target/xtensa/xt-buildroot-overlay-install
deleted file mode 100644
index d2afce1..0000000
--- a/target/xtensa/xt-buildroot-overlay-install
+++ /dev/null
@@ -1,488 +0,0 @@
-#!/bin/sh
-# Not every host installs perl at the same location, handle many locations:
-PATH=/usr/bin:/usr/local/bin:$PATH
-exec perl -x -S $0 ${1+"$@"}
-exit $?
-#!perl -w
-#line 8
-
-# xt-buildroot-overlay-install [-t overlay_tarball] [-b buildroot_dir] \
-# [-k kernel_dir] \
-# [-c config_name] [-l long_name] [-f] [--help]
-#
-# Creates individual overlay tarballs for gcc, binutils, gdb, and
-# the Linux kernel, out of the Xtensa Configuration Overlay tarball from
-# a Tensilica Core Package. And installs these individual tarballs
-# at the appropriate locations within a buildroot source tree.
-#
-# The Xtensa configuration overlay tarball is located in:
-# <xtensa_root>/src/xtensa-config-overlay.tar.gz
-# where <xtensa_root> is the path to the Tensilica Core Package.
-#
-# Copyright (c) 2003-2009 by Tensilica Inc.
-# History:
-# 2007-NOV-08 1.0 meg Initial version
-# 2007-NOV-21 1.1 meg Add -k parameter
-# 2007-DEC-06 1.2 meg Make -k and -b optional, check overlay sw vers.
-# 2008-FEB-27 1.3 meg Accept Xtensa Tools RB-2008.3 overlays
-
-$progvers = "1.3";
-$progname = $0;
-$progname =~ s|.*[/\\:]||;
-
-
-######################################################################
-#
-# Parse cmdline
-#
-
-my $overlay_tarball = undef;
-my $buildroot_dir = undef;
-my $kernel_dir = undef;
-my $config_name = undef;
-my $config_long_name = undef;
-my $force_clobber = 0;
-my $prompt = 1; # undocumented option
-
-sub usage {
- print "$progname version $progvers\n"
- ."Usage: $progname <parameters> [<options>]\n"
- ."Where <parameters> are:\n"
- ." -t file.tgz Specify path to the Xtensa Linux overlay tarball, typically\n"
- ." <xtensa_root>/src/xtensa-config-overlay.tar.gz\n"
- ." -b dir Path to the base of the buildroot source tree, in which\n"
- ." package specific overlay tarballs get installed.\n"
- ." -k dir Path to the base of the Linux kernel source tree, in which\n"
- ." the Linux kernel specific overlay gets installed.\n"
- ." -c config_name Name for the Xtensa processor configuration as it will be\n"
- ." known to the open source community. Must be a lowercase\n"
- ." identifier, starting with a letter, consisting of letters\n"
- ." and numbers and underscores, not ending with underscore\n"
- ." and not containing consecutive underscores. For examples:\n"
- ." dc232b , dc232b_be , mmubasele , fsf , s5000 .\n"
- ." -l long_name Long name for the Xtensa processor configuration, human-\n"
- ." readable with spaces etc allowed (must be quoted).\n"
- ." For example: 'Diamond 232L Standard Core Rev.B (LE)'\n"
- ." Try to keep it within approximately 40 characters.\n"
- ."And <options> are:\n"
- ." -f If package specific overlay tarballs already exist in\n"
- ." the destination source tree, overwrite them without asking.\n"
- ." --help Show this usage message.\n";
-}
-
-# Get arguments:
-if (!@ARGV) {
- usage();
- exit 0;
-}
-while( defined($_ = shift) ) {
- if( /^-[tbclk]$/ ) { # option taking an argument
- my $arg = shift;
- if( !defined($arg) ) {
- print STDERR "$progname: ERROR: missing parameter after '$_' option\n\n";
- usage();
- exit 1;
- }
- $overlay_tarball = $arg if $_ eq "-t";
- $buildroot_dir = $arg if $_ eq "-b";
- $kernel_dir = $arg if $_ eq "-k";
- $config_name = $arg if $_ eq "-c";
- $config_long_name = $arg if $_ eq "-l";
- next;
- }
- if( /^-f$/ ) {
- $force_clobber = 1;
- next;
- }
- if( /^--[m-t]{8}$/ && /[new]([wow])([pup])[fur]\1[maze]\2[tuff]/ ) {
- $prompt = 0;
- next;
- }
- if( /^-(h|help|\-h|\-help|\?)$/i ) {
- usage();
- exit 0;
- }
- print STDERR "$progname: ERROR: unrecognized option or argument '$_'\n\n";
- usage();
- exit 1;
-}
-
-
-######################################################################
-#
-# Validate cmdline arguments
-#
-
-ErrorU("missing -c argument (core name)")
- unless defined($config_name);
-# Try to enforce reasonable names:
-ErrorU("-c: malformed core name '$config_name' (must be lowercase, letter followed by letters/digits, may contain underscore separators)")
- unless $config_name =~ /^[a-z][a-z0-9]*(_[a-z0-9]+)*$/;
-ErrorU("-c: core name too short '$config_name'")
- unless length($config_name) >= 2;
-ErrorU("-c: core name too long '$config_name'")
- unless length($config_name) <= 16;
-
-
-ErrorU("missing -l argument (core long name)")
- unless defined($config_long_name);
-$config_long_name =~ s/^\s+//; # trim extra whitespace...
-$config_long_name =~ s/\s+$//;
-$config_long_name =~ s/\s+/ /g;
-# Try to enforce reasonable names:
-ErrorU("-l: invalid (non-ASCII-printable) characters in core long name '$config_long_name'")
- unless $config_long_name =~ /^[\x20-\x7E]+$/;
-ErrorU("-l: disallowed characters (\"\'\\) in core long name '$config_long_name'")
- if $config_long_name =~ /[\'\"\\]/;
-ErrorU("-l: core long name too short '$config_long_name'")
- unless length($config_long_name) >= 5;
-ErrorU("-l: core long name too long '$config_long_name'")
- unless length($config_long_name) <= 60;
-
-
-#ErrorU("missing -b argument (buildroot source tree directory)")
-# unless defined($buildroot_dir);
-if (defined($buildroot_dir)) {
- ErrorU("-b: not a directory: $buildroot_dir")
- unless -d $buildroot_dir;
- foreach my $p ("toolchain/gcc", "toolchain/binutils", "toolchain/gdb", "target/xtensa") {
- ErrorU("-b: not a buildroot directory: missing $buildroot_dir/$p")
- unless -d $buildroot_dir . "/" . $p;
- }
-}
-
-
-#ErrorU("missing -k argument (Linux kernel source tree directory)")
-# unless defined($kernel_dir);
-if (defined($kernel_dir)) {
- ErrorU("-k: not a directory: $kernel_dir")
- unless -d $kernel_dir;
- foreach my $p ("kernel", "arch/xtensa/kernel", "include/asm-xtensa") {
- ErrorU("-k: not a Linux kernel directory: missing $kernel_dir/$p")
- unless -d $kernel_dir . "/" . $p;
- }
-}
-
-
-if (!defined($buildroot_dir) and !defined($kernel_dir)) {
- print STDERR "$progname: WARNING:\n";
- print STDERR "$progname: WARNING: Test run only, NOTHING WILL BE INSTALLED\n";
- print STDERR "$progname: WARNING: (use -b and -k to specify install destination)\n";
- print STDERR "$progname: WARNING:\n";
-}
-
-
-my @ovpaths = ( "/src/xtensa-config-overlay.tar.gz",
- "/xtensa-elf/src/linux/misc/linux-overlay.tar.gz" );
-if (!defined($overlay_tarball)) {
- # Try to locate the overlay tarball based on XTENSA_SYSTEM and XTENSA_CORE
- # settings:
- my $xtensa_root = `xt-xcc --show-config=config 2>/dev/null`;
- $xtensa_root = "" unless defined($xtensa_root);
- chomp($xtensa_root);
- if ($xtensa_root ne "") {
- ($overlay_tarball) = grep(-f $xtensa_root.$_, @ovpaths);
- if (!defined($overlay_tarball)) {
- ErrorU("Xtensa configuration overlay tarball not found: ".$xtensa_root.$ovpaths[0])
- }
- } else {
- ErrorU("missing -t argument (Xtensa configuration overlay tarball filename)\n"
- ."and no default Xtensa Core Package defined in the environment");
- }
-} else {
- foreach my $p ("", @ovpaths) {
- if (-f $overlay_tarball.$p) {
- $overlay_tarball .= $p;
- last;
- }
- }
- ErrorU("-t: file not found: $overlay_tarball") unless -f $overlay_tarball;
-}
-
-
-######################################################################
-#
-# Misc
-#
-
-my $overlay_unpacked = 0;
-my $ovdir;
-
-sub cleanup {
- if ($overlay_unpacked) {
- system("rm -rf '$ovdir' 2>/dev/null");
- }
-}
-
-sub ErrorEmit {
- my ($msg,$usage) = @_;
- $msg =~ s|\n|"\n${progname}: ERROR: "|ge;
- print STDERR "$progname: ERROR: $msg\n";
- if ($usage) {
- print "\n";
- usage();
- }
- cleanup();
- exit 1;
-}
-sub ErrorU { ErrorEmit(shift,1); }
-sub Error { ErrorEmit(shift); }
-
-
-# Read specified file (as binary), returning contents.
-#
-sub readfile {
- my ($filename) = @_;
- # Read the file:
- open(INFILE,"<$filename") or Error("error reading from '$filename': $!");
- my $savesep = $/;
- undef $/;
- my $file = <INFILE>;
- $/ = $savesep;
- close(INFILE);
- $file;
-}
-
-# Write specified file (as binary) with first argument (string).
-#
-sub writefile {
- my ($filename, $file) = @_;
- # Read the file:
- open(INFILE,">$filename") or Error("error writing to '$filename': $!");
- print INFILE $file;
- close(INFILE) or Error("error closing file '$filename': $!");
-}
-
-
-######################################################################
-#
-# Determine a temporary directory.
-#
-
-my $tmpdir = "/tmp";
-if (defined($ENV{"TMP"}) and -d $ENV{"TMP"}) {
- $tmpdir = $ENV{"TMP"};
-} elsif (defined($ENV{"TEMP"}) and -d $ENV{"TEMP"}) {
- $tmpdir = $ENV{"TEMP"};
-}
-
-
-######################################################################
-#
-# Unpack the general overlay tarball
-#
-
-my $user = defined($ENV{"USER"}) ? $ENV{"USER"} : "xtensa";
-$ovdir = $tmpdir."/tmp-overlay-${user}-$$";
-mkdir $ovdir or Error("cannot create directory $ovdir");
-$overlay_unpacked = 1;
-system("tar xfz '$overlay_tarball' -C '$ovdir'")
- and Error("tar failed...");
-
-
-######################################################################
-#
-# Define and sanity check contents of overlay
-#
-
-my $oldpack = -f $ovdir."/xtensa-elf/src/linux/misc/core.h";
-my $pf1 = ($oldpack ? "src/" : "");
-my $pf2 = ($oldpack ? "xtensa-elf/src/linux/misc/" : "config/");
-
-my @packages = (
- ["binutils", "toolchain/binutils",
- ["${pf1}/binutils/xtensa-modules.c", "bfd/"],
- ["${pf1}/binutils/xtensa-config.h", "include/"],
- #["${pf1}/binutils/xtensa-config.sh", "ld/emulparams/"],
- ],
- ["gcc", "toolchain/gcc",
- ["${pf1}/gcc/xtensa-config.h", "include/"],
- ],
- ["gdb", "toolchain/gdb",
- ["${pf1}/gdb/xtensa-modules.c", "bfd/"],
- ["${pf1}/gdb/xtensa-config.h", "include/"],
- ["${pf1}/gdb/xtensa-config.c", "gdb/"],
- ["${pf1}/gdb/xtensa-regmap.c", "gdb/gdbserver/"],
- ["${pf1}/gdb/xtensa-regmap.c", "gdb/gdbserver/xtensa-xtregs.c"], # for GDB 6.8
- ["${pf1}/gdb/xtensa-regmap.c", "gdb/xtensa-xtregs.c"], # for GDB 6.8
- ["${pf1}/gdb/reg-xtensa.dat", "gdb/regformats/"],
- ],
- ["kernel", "target/xtensa", # ???
- ["${pf2}core.h", "include/asm-xtensa/variant-${config_name}/"],
- ["${pf2}tie.h", "include/asm-xtensa/variant-${config_name}/"],
- ["${pf2}tie-asm.h", "include/asm-xtensa/variant-${config_name}/"],
- ],
-);
-
-# Check that all files are present ...
-foreach my $pack (@packages) {
- my ($pname, $buildroot_subdir, @files) = @$pack;
- print "Checking files for $pname ...\n";
- foreach my $f (@files) {
- my ($src, $dst) = @$f;
- -f $ovdir."/".$src or Error("missing '$src' in overlay tarball");
- }
-}
-
-
-######################################################################
-#
-# Extract some useful information
-#
-
-# Extract core name as specified in the build.
-my $coreh = readfile($ovdir."/".$pf2."core.h");
-
-$coreh =~ /^\s*\#\s*define\s+XCHAL_SW_VERSION\s+(\w+)/m;
-my $swversion = $1;
-defined($swversion) or Error("missing XCHAL_SW_VERSION in overlay core.h file;\n"
- ."overlay is too old, need RB-2008.3 (SW version 7.1.1) or later");
-
-$coreh =~ /^\s*\#\s*define\s+XCHAL_CORE_ID\s+"([^"]+)"/m;
-my $coreid = $1;
-defined($coreid) or Error("missing XCHAL_CORE_ID in overlay core.h file");
-
-$coreh =~ /^\s*\#\s*define\s+XCHAL_HW_VERSION_NAME\s+"([^"]+)"/m;
-my $hwversion = $1;
-defined($hwversion) or Error("missing XCHAL_HW_VERSION_NAME in overlay core.h file");
-
-
-$swvers_human = sprintf("%u.%u.%u",
- $swversion/100000, (($swversion/1000) % 100), ($swversion % 1000));
-my $release = "software version $swvers_human";
-if (-f $ovdir."/release") {
- $release = readfile($ovdir."/release");
- chomp($release);
-}
-
-
-######################################################################
-#
-# Prompt user to be sure this is what he wants to do
-#
-
-# Catch Ctrl-C so we can do a proper cleanup:
-sub catch_term {
- my $signame = shift;
- #print STDERR "whoa!\n";
- cleanup();
- print STDERR "\n$progname: Cleaned up.\n";
- exit 3;
-}
-$SIG{TERM} = \&catch_term;
-$SIG{HUP} = \&catch_term;
-$SIG{INT} = \&catch_term;
-
-$| = 1;
-print "\n",
- "About to generate package-specific overlay tarballs for the following:\n",
- "\n",
- " Xtensa processor short name: $config_name\n";
-print " This short name overrides the name specified in the XPG: $coreid\n" if $coreid ne $config_name;
-#print " Please ensure that's the name you want. If submitted to the open source\n",
-# " community, it can be a hassle to change later on.\n";
-print " Xtensa processor description: $config_long_name\n",
- " Targeting Xtensa HW version: $hwversion\n",
- " Xtensa configuration overlay: $overlay_tarball\n",
- " (release of overlay): $release\n",
- " Destination buildroot dir: ".(defined($buildroot_dir)?$buildroot_dir:"(none, not installed)")."\n",
- " Destination Linux kernel dir: ".(defined($kernel_dir)?$kernel_dir:"(none, not installed)")."\n",
- "\n",
- "Are you sure? (y/n) ";
-if ($prompt) {
- my $line = <STDIN>;
- chomp($line);
- if ($line !~ /^y(es)?$/i) {
- print "\nInstallation aborted.\n";
- cleanup();
- exit 2;
- }
-} else {
- print "YES [no prompt]\n";
-}
-print "\n";
-
-
-######################################################################
-#
-# Now generate the tarballs
-#
-
-# Now generate each tarball ...
-foreach my $pack (@packages) {
- my ($pname, $buildroot_subdir, @files) = @$pack;
- my $tarname = "${pname}-xtensa_${config_name}.tgz";
- my $fulltarname;
- if (defined($buildroot_dir)) {
- my $tarsubname = $buildroot_subdir . "/" . $tarname;
- print "Generating and installing $tarsubname ...\n";
- $fulltarname = $buildroot_dir . "/" . $tarsubname;
- } else {
- print "Generating $tarname ...\n";
- $fulltarname = $ovdir . "/" . $tarname;
- }
- if (-e $fulltarname) {
- if ($force_clobber or !defined($buildroot_dir)) {
- unlink($fulltarname) or Error("could not delete '$fulltarname': $!");
- } else {
- Error("destination tarball already exists: '$fulltarname'");
- }
- }
- my $pdir = $ovdir."/tmp-".$pname;
- system("rm -fr '${pdir}' 2>/dev/null");
- mkdir $pdir or Error("cannot create directory $pdir");
- foreach my $f (@files) {
- my ($src, $dst) = @$f;
- # If $dst ends in / , take filename from $src :
- if ($dst =~ m|/$|) {
- my $fname = $src;
- $fname =~ s|^.*/||;
- $dst .= $fname;
- }
- # Ensure destination directory exists:
- my $dstdir = $pdir;
- while ($dst =~ s|^([^/]+)/+||) {
- $dstdir .= "/" . $1;
- mkdir($dstdir);
- }
- # Read file:
- my $content = readfile($ovdir."/".$src);
-
- # Adjust contents of file.
- # Fix-up typo:
- $content =~ s/XCHAL_SA_(NCP|CP\d+)_/XCHAL_$1_SA_/g;
- # Update core name info:
- my $iscore = ($content =~ s/^(\s*\#\s*define\s+XCHAL_CORE_ID\s+)"[^"]+"/$1"$config_name"/mg);
- $iscore or $content =~ s{^(\s*\#\s*define\s+XCHAL_INST_FETCH_WIDTH\s+\S+\s*(/\*[^\*]*\*/)?\s*$)}
- {$1\n\#undef XCHAL_CORE_ID\n\#define XCHAL_CORE_ID\t\t\t"$config_name"\n}smg;
- # Update core description info:
- $content =~ s/^(\s*\#\s*define\s+XCHAL_CORE_DESCRIPTION\s+)"[^"]+"/$1"$config_long_name"/mg
- or $content =~ s{^(\s*\#\s*define\s+XCHAL_CORE_ID\s+\S+\s*(/\*[^\*]*\*/)?\s*$)}
- {"$1\n" . ($iscore ? "" : "\n\#undef XCHAL_CORE_DESCRIPTION\n")
- . "\#define XCHAL_CORE_DESCRIPTION\t\t\"${config_long_name}\""}smge;
-
- # Write (possibly modified) file:
- writefile($dstdir."/".$dst, $content);
- }
- my $tarcmd = "tar cfz '${fulltarname}' -C '${pdir}' .";
- system($tarcmd) and Error("failed executing: $tarcmd");
-
- # Install Linux kernel overlay:
- if ($pname eq "kernel" and defined($kernel_dir)) {
- print "Installing Linux kernel overlay from $tarname ...\n";
- my $untarcmd = "tar xfz '${fulltarname}' -C '${kernel_dir}' .";
- system($untarcmd) and Error("failed executing: $tarcmd");
- }
- # Possible TODO: update arch/xtensa/{Kconfig,Makefile} to add this config?
-}
-
-
-######################################################################
-#
-# The End
-#
-
-cleanup();
-print "Done.\n";
-exit 0;
-
diff --git a/toolchain/gcc/gcc-uclibc-4.x.mk b/toolchain/gcc/gcc-uclibc-4.x.mk
index e29d797..1a075cc 100644
--- a/toolchain/gcc/gcc-uclibc-4.x.mk
+++ b/toolchain/gcc/gcc-uclibc-4.x.mk
@@ -33,11 +33,6 @@ else
GCC_SITE:=$(BR2_GNU_MIRROR)/gcc/gcc-$(GCC_VERSION)
endif
-ifneq ($(filter xtensa%,$(ARCH)),)
-include target/xtensa/patch.in
-GCC_PATCH_EXTRA:=$(call XTENSA_PATCH,gcc,$(GCC_PATCH_DIR),. ..)
-endif
-
GCC_SOURCE:=gcc-$(GCC_VERSION).tar.bz2
GCC_PATCH_DIR:=toolchain/gcc/$(GCC_VERSION)
GCC_DIR:=$(TOOLCHAIN_DIR)/gcc-$(GCC_VERSION)
@@ -262,7 +257,7 @@ gcc-patched: $(GCC_DIR)/.patched
$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
# Apply any files named gcc-*.patch from the source directory to gcc
ifneq ($(wildcard $(GCC_PATCH_DIR)),)
- support/scripts/apply-patches.sh $(GCC_DIR) $(GCC_PATCH_DIR) \*.patch $(GCC_PATCH_EXTRA)
+ support/scripts/apply-patches.sh $(GCC_DIR) $(GCC_PATCH_DIR) \*.patch
endif
ifeq ($(ARCH)-$(BR2_GCC_SHARED_LIBGCC),powerpc-y)
diff --git a/toolchain/gdb/gdb.mk b/toolchain/gdb/gdb.mk
index f5af454..6b029a8 100644
--- a/toolchain/gdb/gdb.mk
+++ b/toolchain/gdb/gdb.mk
@@ -16,11 +16,6 @@ else
GDB_PATCH_DIR:=toolchain/gdb/$(GDB_VERSION)
endif
-ifneq ($(filter xtensa%,$(ARCH)),)
-include target/xtensa/patch.in
-GDB_PATCH_EXTRA:=$(call XTENSA_PATCH,gdb,$(GDB_PATCH_DIR),. ..)
-endif
-
GDB_DIR:=$(TOOLCHAIN_DIR)/gdb-$(GDB_VERSION)
$(DL_DIR)/$(GDB_SOURCE):
@@ -31,7 +26,7 @@ $(GDB_DIR)/.unpacked: $(DL_DIR)/$(GDB_SOURCE)
mkdir -p $(GDB_DIR)
$(GDB_CAT) $(DL_DIR)/$(GDB_SOURCE) | tar -C $(GDB_DIR) $(TAR_STRIP_COMPONENTS)=1 $(TAR_OPTIONS) -
ifneq ($(wildcard $(GDB_PATCH_DIR)),)
- support/scripts/apply-patches.sh $(GDB_DIR) $(GDB_PATCH_DIR) \*.patch $(GDB_PATCH_EXTRA)
+ support/scripts/apply-patches.sh $(GDB_DIR) $(GDB_PATCH_DIR) \*.patch
endif
$(call CONFIG_UPDATE,$(@D))
touch $@
diff --git a/toolchain/toolchain-common.in b/toolchain/toolchain-common.in
index 6e0d159..10950ba 100644
--- a/toolchain/toolchain-common.in
+++ b/toolchain/toolchain-common.in
@@ -93,7 +93,7 @@ config BR2_NEEDS_GETTEXT_IF_LOCALE
default y if (BR2_NEEDS_GETTEXT && BR2_ENABLE_LOCALE)
config BR2_USE_MMU
- bool "Enable MMU support" if BR2_arm || BR2_armeb || BR2_mips || BR2_mipsel || BR2_sh || BR2_xtensa
+ bool "Enable MMU support" if BR2_arm || BR2_armeb || BR2_mips || BR2_mipsel || BR2_sh
default y if !BR2_bfin
help
If your target has a MMU, you should say Y here. If you
diff --git a/toolchain/uClibc/uclibc.mk b/toolchain/uClibc/uclibc.mk
index 20cc820..d1cd718 100644
--- a/toolchain/uClibc/uclibc.mk
+++ b/toolchain/uClibc/uclibc.mk
@@ -38,7 +38,6 @@ UCLIBC_TARGET_ARCH:=$(shell $(SHELL) -c "echo $(ARCH) | sed \
-e 's/sh[234].*/sh/' \
-e 's/mips.*/mips/' \
-e 's/cris.*/cris/' \
- -e 's/xtensa.*/xtensa/' \
")
UCLIBC_TARGET_ENDIAN:=$(call qstrip,$(BR2_ENDIAN))